- #ESXI LSI MEGARAID STORAGE MANAGER INSTALL#
- #ESXI LSI MEGARAID STORAGE MANAGER SOFTWARE#
- #ESXI LSI MEGARAID STORAGE MANAGER DOWNLOAD#
Thanks for the guide, I managed to follow all of the steps and have the controller updated to the LSI firmware and have the VIB installed on the ESX host. You need to stop the local discovery, then go to “Configure Host” and select “Display all the systems in the network of local server”. If you have a problem discovering the ESXi host in MSM, watch. MSM uses TCP port 5989, so be sure to allow that in your ESXi firewall (just enable CIM secure server).
#ESXI LSI MEGARAID STORAGE MANAGER SOFTWARE#
The Storage Management software is rather slow, buggy, and crash-prone on Windows 7, but I was able to create a logical drive and change the caching policies on the existing VDs. I then tried the MSM from MegaRAID SAS 9285-8e page (Windows – 5.0 – 10M12, Version: 9.00-01 from Mar 11, 2011), and it was able to discover and connect to the controller.
#ESXI LSI MEGARAID STORAGE MANAGER DOWNLOAD#
LSIProvider 500.04.V0.24-261033 LSI VMwareAccepted įrom the 8480E product page, you can download the “MegaRAID Storage Manager” for your preferred OS to connect to the SIM adapter and manage the controller. Package version of the image file: 7.0.1-0083Īfter the reboot, you should see the LSIProvider vib is installed: Package version on the controller: 7.0.1-0075 Shut down all VMs on the host and flush the controller’s firmware: If it complains about libstorelib.so missing, you need to copy it from ESX 4 host and place in the same directory as MegaCli.
#ESXI LSI MEGARAID STORAGE MANAGER INSTALL#
Install the vib from SMIS Provider package: Search for “SMIS Provider” and download “SAS MegaRAID VMWare SMIS Provider VIB (Certified) for ESXi 5.0”, extract the vib file to your host’s persistent storage. Extract mr1068fw.rom to your host’s persistent storage. Get the firmware from the same page (search for “Firmware”). Download MegaCli package, copy the executable from VMware folder to your host’s persistent storage (use your local vmfs datastore do not use the root partition – it uses tmpfs to minimize the writes to the flash media and the file will disappear after the reboot). Go to => “Support” => “Support Downloads by Product” and search for 8480E. Installing MegaCli and LSI SIM adapter in ESXi 5 You can use LSI firmware on it, since it’s essentially the same card as MegaRAID SAS 8480E. Perc 5i is a Dell’s rebranded LSI SAS1078 RAID on Chip (ROC).
0 kommentar(er)
